How To Reset Oil Light On Honda Accord 2010. First, switch your ignition to the run position, which is one click before starting the engine. If your vehicle has an ignition button, press the power button.
Press the select/reset button located on either your steering wheel or as a knob on your dash. Press and hold the “ select ” knob for more than 10 seconds until the display blinks. Turn the ignition to the run position.press the select/reset knob until the engine life indicator is displayed.press the select/reset knob for more than 10 seconds, the indicator and the maintenance code(s) will blink.press the select/ reset knob for 5 more seconds, the maintenance code(s) will disappear and oil life will be reset to 100.turn the ignition off.
Table
The Engine Oil Life Indicator And The Maintenance Code (S) Will Blink.
Press the select/reset knob for more than 10 seconds. Turn the ignition to the “ on ” position. Press the select/reset button until the engine oil life indicator is displayed.
Release And Hold Again For Five Seconds.
The engine oil life indicator and the maintenance code (s) will blink. Press the select/reset button located on either your steering wheel or as a knob on your dash. Here are the instructions for resetting the oil maintenance light on a 2007 or newer honda.
Holding The Button Down Will Reset The Oil Life Indicator After About 10 Seconds.
Then, immediately press and hold the. Turn the ignition switch to the “on/ii” position. This video shows how to reset the oil maintenance light on a 2011 honda accord.
Turn The Ignition To Run (One Position Before Starting Engine).
2010 honda accord maintenance light reset instructions. I think this method works for older and newer accords as well, probably from. Press the select/reset knob until it displays the “oil life percentage”.
Turn The Ignition To Run (One Click Before Starting The Engine).
And turn the ignition switch on (ii). Do not start the vehicle. If your vehicle has an ignition button, press the power button.